-
Milling-turning compund lathes
-
CNC lathe with inclined rail
-
Flat-bed CNC Lathe
-
Engine lathe
-
Vertical machinging center
1、spindle:The spindle is structured with high-precision sleeve,and characterized by increased reduction ratio and good low-speed performance.
2、Turret:Row tools for quick tool changing and mass production.
3、X/Z-axis:It is driven by a high-grade imported precision ball screw with the roller guide widened and span increased,thereby with standing heavy cutting.
Item | unit | Specification | Remark | |
Working range | Maximum spinning diameter | mm | Φ420 | |
Maximum turning diameter of disk parts | mm | Φ320 | ||
Maximum turning diameter of shaft parts | mm | Φ180 | ||
Maximum machining length | mm | 300 | ||
Saddle inclination against the level | ° | 60° | ||
Spindle | Spindle motor | kw | 5.5/7.5（continuous/30minutes） | |
Spindle end | A2-5 | |||
Diameter of spindle through-hole | mm | Φ56 | ||
Maximum rotational speed of spindle | r/min | 4500 | ||
Spindle precision | mm | Radial clearance≤0.008， axial clearance≤0.005 | ||
Coordinate axis | Maximum travel along the horizontal direction(X-axis) | mm | 800 | |
Maximum travel along the vertical direction(Z-axis) | mm | 300 | ||
X-axis serve unit | 10Nm,2500r/min | |||
Z-axis serve unit | 10Nm,2500r/min | |||
Maximum feed rate along the X-axis | m/min | 36 | ||
Maximum feed rate along the Z-axis | m/min | 36 | ||
Positioning precision | mm | X±0.006,Z±0.011, | ||
Repeated Positioning precision | mm | X±0.003,Z±0.003, | ||
Tool post | Type of tool post | Pectinate tool post | ||
Number of tools | Each for standard horizontal double tool seat,positive and negative single tool seat,and boring tool seat. | |||
Specification of outer diameter and end face tool holder | mm | 20X20 | ||
Diameter of inner hole tool seat | mm | Φ32 | ||
Clamping device | chuck | 6"three-jaw medium hollow oil pressure chuck | ||
Hydraulic cylinder | Medium hollow rotary cylinder | |||
Hydraulic system | Oil tank capacity | L | 60 | |
Hydraulic pump pressure | kg | 35 | ||
Chip removal | Auto chip conveyor | Chain plate type chip removal conveyor and chip collecting truck | ||
Others | Total capacity of lathe power supply | kw | 18 | |
Boundary dimension：length x width x height | mm | 2130x1580x1650 | ||
Net weight of lathe | kg | 2300 |
